Decorative Cement-Based Coating

Seamless Concrete Aesthetic. Thin-Build Performance.

MICRO CONCRETE™ is a thin, cement-based decorative coating reinforced with mineral fillers. Designed for walls, floors and decorative spaces, it creates a contemporary, continuous concrete appearance with 1–2 mm application thickness per coat.

Key Benefits

• Seamless, jointless concrete look
• Thin-build application: 1–2 mm per coat
• Excellent adhesion on properly prepared substrates
• High mechanical strength and surface hardness
• Smooth, nuanced or textured decorative finishes
• Wide range of standard and custom tints
• Interior and exterior applications with appropriate protective system

Applications

Walls, floors, kitchens, bathrooms, showers, countertops, showrooms, retail, offices, restaurants, furniture and decorative architectural features.

Product Information

Single-component powder mixed on site with potable water. Mixing ratio: 100 g powder to 31–38 mL water. Working time: approximately 45 minutes. Application temperature: 10–32°C. Full cure: approximately 7 days at 20°C and 50% RH.

Application Guidance

Substrates must be sound, clean, dry and properly prepared. Repair unstable areas and treat porous or smooth substrates with suitable preparation and primer. Apply in thin coats with a trowel. Seal or protect the cured surface using a compatible protective system, especially in wet or exterior areas. Consult the Technical Data Sheet for full instructions.